The four-digit code shows you the year and week that the alarm was made. The first two digits relate to the year and the second two digits relate to the week. The Ei3024 is fitted with a large central Test/ Silence button to facilitate frequent testing of the alarm and system. The silence function allows the alarm/ system to be silenced in the case of a false/ nuisance alarm and low battery/ fault beeps. SmartLINK compatible - plug in an Ei3000MRF module for wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal.

Intelligent integrated software enables the device to detect all fire types (TF1 to TF6 & TF8) which surpasses conventional single sensor alarms. The risk of false alarms is also greatly reduced with its smoke chamber design, integrated insect screen and automatic dust compensation. The Ei3024 contains AudioLINK technology, which allows you to extract real time data from the alarm directly to a smartphone or tablet via the AudioLINK App. The memory feature allows an alarm that has previously activated to be easily identified (through the red flashing LED). The Ei3024 self tests its sensors, battery and internal circuitry every 48 seconds. Any fault condition found will be indicated by a combination of yellow LED flashes and/or audible beeps. Smoke alarms have different sensors to detect different fire types. With the Ei3024 Multi-Sensor Fire Alarm sensor choice is simple as this alarm provides total fire coverage. Its combination of a Heat and an Optical sensor means that it can detect all fire types.A large Test / Silence button is fitted to the alarm enabling frequent testing. The silence function allows the alarm / system to be silenced in the case of a false alarm and low battery / fault noises. Aico Ei3024 3000 Series White 230V Mains Multi-Sensor Optical and Heat Alarm with Rechargeable Battery This is the Aico Ei3024 is a multi-sensor fire alarm with enhanced optical smoke sensor and automatic dust compensation; it delivers a faster response to a wider range of fires. This multi-sensor alarm detects both smoke and heat from a fire, and so the location is ideally in the hallway, landing, living room, and bedroom areas. If you are using an Alarm Controller Ei450 this will continue for as long as you hold down the ‘Test’ button.

SmartLINK compatible. Simply plug in an Ei3000MRF module to enable wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal. Smoke alarms have different sensors to detect different fire types. With The Aico Ei3024 Multi-Sensor Fire Alarm sensor choice is simple as this alarm provides total fire coverage. Its combination of a Heat and an Optical sensor means that it can detect all fire types.Performing a regular test is a vital part of ensuring continued fire and carbon monoxide detection. Alarms should be tested monthly to ensure everything is working correctly. If it is a regular single beep (approximately once every minute), then the battery may be running low, and you may need to change the battery in the alarm. This is relevant for the 140RC Series alarms. This alarm is a multi-sensor fire alarm - it contains both optical and heat sensors to provide a total fire coverage. The intelligent software it has installed allows it to detect all fire types (TF1 to TF6 & TF8) surpassing traditional single sensor Alarms. In addition, the chamber design, integrated insect screen and unique dust compensation algorithm reduce the risk of false alarms. If the alarm contains AudioLINK – Once the alarm has stopped activating and it is safe to enter the property extract a report to identify the details of the incident.

You will know when you need to change the battery, as you will hear a single regular beep (low battery warning) coming from the alarm, however it is recommended that you change the battery every year. If you have more than one alarm in the property and they are interconnected, this will also trigger all the other alarms in the property.Most of our alarms have a 10-year life, after which they should be replaced to ensure you carry on getting the best protection.