Joined in 2023 
82 
63 About this deal
The GPU average dT places the H710 between the H500M Mesh and the 570X on the chart. It’s not a bad score, and it’s again a couple degrees cooler than the H700i’s initial result of 52.5C dT. NZXT’s choice to ship with four fans is a valid way of making up the gap between it and cases with better airflow potential. Blender - CPU & GPU Isolated Renders
In all, the H7 is slightly smaller than the H710, and it is significantly lighter. The H710 was 12.1 kg, and the new H7 is 10.26kg. That said, both cases support the same levels of CPU clearance, front fan/radiator clearance, and cable management space. The only compromise with the new H7 is that is has 13mm less GPU clearance, not that 400mm of clearance isn’t enough for practically all modern GPUs. In building a high-quality PC case, you should consider deciding first on the form factor. These form factors are known by different names, such as full tower and micro tower, but the most important thing is to find a case that is compatible with the size of your motherboard. Rendering our Blender test file exclusively on the CPU averaged a CPU dT of 36.7C, roughly one degree below the previous average of 37.6C for the H700i. This is actually a great score, on par with the PM01 and the HAF X, two cases we continually praise for their cooling.The torture workload got the CPU to 51.9C dT average, and 46.3 dT average with the front panel removed. That’s a reasonably-sized gap and indicates that the front panel isn’t completely ruining thermals, but part of that is the fact that there are three intake fans capable of forcing air through. The dust filter is behind the front panel directly over the fans, so the perforations on either side of the front panel aren’t meant to be filters and could be completely open like the 465X. The running theme with NZXT H-series cases (perhaps excluding the H510 Elite) is thermal performance that we grudgingly admit is adequate, while at the same time airflow has been sacrificed for aesthetic reasons.
Size does matter when it comes to PC cases or PC towers. Therefore, knowing the dimensions and specifications of both the NZXT H710 and H710i case sizes is essential. Their size determines how many important components can be installed inside and reflects how efficient the performance is. Regarding the supported motherboard sizes, both NZXT PC cases hold a Mini-ITX, EATX, Micro-ATX, and ATX up to 272 mm. The excellent cable management, better thermals, and updated design make the NZXT H7 series one to watch out for. If you want a high-quality PC case with an ergonomic design, the NZXT PC cases are probably what you’re looking for. The NZXT H-series PC cases are expertly crafted PC cases with some outstanding features at an affordable price. Load testing is conducted using Prime95 LFFTs and Kombustor “FurMark” stress testing simultaneously. Testing is completely automated using in-house scripting, and executes with perfect accuracy on every run. CPU Torture - NZXT H710 ReviewPotentially you could cross vendors too - say replace an Lenovo / IBM ServeRAID M5015 with a Intel RS25DB080… well, you get my drift.
We’ll keep this section very brief since we’ve already reviewed most aspects of this case, but it’s worth mentioning a couple points again. First, the top and front panels are an enormous pain to remove. They’re held on with stiff clips, and the best method for defeating them is to yank the front panel violently from the bottom edge and then yank the top panel violently from the front edge. This MUST be done to remove the front filter, replace fans, or take out the radiator/fan tray at the top of the case, and it runs the risk of snapping the spindly 4.5cm clips or curving the panels and creating a gap between the front and top panels. The fan tray is still very nice, by the way--it’s held in with thumbscrews and can be flipped upside-down to move it higher away from the motherboard, and we’d like to see a similar tray at the front of the case. No matter why you’re building your own PC, whether it’s for a fully loaded gaming setup or a new work-from-home station, finding the perfect PC case is just as important as selecting the components that go inside. The H710 series of cases only supports EATX motherboards up to 10.7 inches in width. You may be able to install wider motherboards by removing the included cable bar, however this may negatively affect the aesthetics of the case and remove some cable management options such as tie-downs that are part of the cable bar. What length PCIe Riser Cable should I use to vertical mount a GPU in the H710i? Moreover, both the H710 and H710i come with RGB lighting pre-installed, which adds character to your finished build by utilizing the tempered glass side panel.The NZXT H710i is an upgrade over the less expensive base model H710; all dimensions and specs are the same, but the H710i has the feature of the NZXT I version, which is the Smart Device V2. From the dimensions to the cooling system, they are nearly similar. The only difference is that the H710i is an I version that includes more features and an upgraded version over the less expensive base model H710.
Great Deal 
New Comment