https://cdn.opieoils.co.uk/images/variants/icon/motul/motul-dexron-iii-atf-automatic-transmission-power-steering-fluid-1-litre-3.jpg https://standards.globalspec.com/std/13085832/9986555 DEXRON High-Performance Automatic Transmission Fluid (DEXRON HP-ATF) GTL-Exxon Mobil-Infineum https://cdn.opieoils.co.uk/images/variants/large/motul/motul-dexron-iii-atf-automatic-transmission-power-steering-fluid-1-litre-3.jpg

https://www.sae.org/publications/technical-papers/content/941887/ Friction Characteristics of DEXRON®-III Automatic Transmission Fluids On the contrary, the fluid is ready to improve the oxidation and thermal stability of your vehicle. The gear shifting optimizing performance during high temperatures is truly far better as this is a very thin type of fully synthetic oil. Note Dexron 6 is also ready to prevent transmission vibration. https://cdn.opieoils.co.uk/images/variants/large/motul/motul-dexron-iii-atf-automatic-transmission-power-steering-fluid-1-litre-6.jpg Furthermore, if you have both Dexron 3 and Dexron 6, you should read the user manual to know the proper mixing process. Try to filter properly after mixing these two fluids. Dexron III Vs Dexron VI Power Steering GM Dexron-III (H) licensed products prior to 2011 had a license number on the can that began with the letter H. Example: H-30001.

Conclusion

In 1949, General Motors (GM) established an Automatic Transmission Fluid (ATF) Committee (GM ATF Committee). The GM ATF committee established fluid specifications and a qualification procedure to eliminate unsatisfactory fluids and, at the same time, provide the car owner with a means of identifying qualified fluids. The GM ATF Committee released a new Type "A" fluid specification. [3] [4] GM partnered with the Armour Research Foundation for fluid and qualification testing. Fluids that met the GM qualification requirements were issued an Armour Qualification (AQ) license number of AQ-ATF-xxx. Example (AQ-ATF-101). The license number had to be displayed on the fluid container. [5] Under "normal" driving conditions, the automatic transmission fluid and filter never need to be changed. Dexron 3 transmission fluid was introduced in 1994 as Dexron III (F) and was used until Dex 6 was released in 2006. What Is The Difference Between Dexron III and Mercon V? IMPORTANT: Containers of this fluid have a revised blue and silver label on the front of the container. This "Dexron Approved" Dexron HP product has a J-62120 license number on the rear label of the container. In 2005, Ford released the Mercon Low Viscosity (LV) fluid and GM released the Dexron VI specification. [19] The fluid specification for Dexron-VI (J) was first used as the GM factory-fill automatic transmission fluid for the model year 2006. Roy Fewkes, GM Powertrain Staff Project Engineer and Chairman of the GM

If you live in an area with particularly cold weather then you’re going to want to make sure all the fluids and oils in your vehicle are going to continue to flow against the freezing temperatures and provide protection and performance as you would expect.https://www.sae.org/publications/technical-papers/content/490011/ Is The Torque Converter Going To Be “It”? https://cdn.opieoils.co.uk/images/variants/medium/motul/motul-dexron-iii-atf-automatic-transmission-power-steering-fluid-1-litre-2.jpg

While Dexron 3 is a highly used transmission fluid, no, it cannot be used in all automatic transmissions. It’s always best to consult your vehicle’s owners manual to learn what transmission fluid is recommended for your application. Can Dexron 3 Be Used As Power Steering Fluid?However, let’s make a perfect comparison of these fluids so that you can hassle-free compare each other. Updated Version https://cdn.opieoils.co.uk/images/variants/medium/motul/motul-dexron-iii-atf-automatic-transmission-power-steering-fluid-1-litre-7.jpg https://cdn.opieoils.co.uk/images/variants/large/motul/motul-dexron-iii-atf-automatic-transmission-power-steering-fluid-1-litre-5.jpg Dexron III(F): Released in 1994 – designed for better friction stability, more high temp oxidation stability, and better material compatibility.